Table of Contents 1 Introduction................................1 2 Initial Setup................................1 2.1 WiFi Connection............................1 2.2 Network................................1 2.3 Mounting..............................1 2.3.1 Surface Mounting to Drywall.......................1 2.3.2 Rack Mounting.............................2 2.3.3 Dual Clock Mount Bracket........................2 3 Configuration...............................4 3.1 Web Page – Default password is “tmachine”....................4 4 Initial Setup of the WiFi Connection........................4 4.1.1 Step 1: Connect the WiFi clocks wired Ethernet interface and apply Power........4 4.1.2 Step 2: Log in to the clock through the Wired connection at the DHCP assigned address....4 4.2 Network................................5...
Page 3
6 Troubleshooting..............................11 6.1 Flashing Seconds............................11 6.1.1 Lost Network............................11 6.1.2 Lost Access Point..........................11 6.2 AM/PM LED Indications...........................11 6.2.1 Both AM & PM Off..........................11 6.2.2 AM On, PM Off..........................11 6.2.3 AM Off, PM On..........................11 6.2.4 Both AM & PM On..........................11 6.3 Unable To Access Web Page........................12...
Installation & Operation Manual 1 Introduction Time Machines Precision WiFi Clocks (TMPCs) provide an accurate synchronized time source when you absolutely can’t afford a time shift. TMPCs use a power source and communicate with WiFi and Simple Network Time Protocol (SNTP) to make installation and setup as clean and simple as possible.
How to mount two clocks in the dual mount bracket: 1. Take two Time Machines clocks and match where the notch is on the display cover – this is where the Ethernet cables will enter into the clock displays. The Dual Mount Bracket can be placed on the bottom or on the top of the clocks.
Page 6
Installation & Operation Manual 8. Power up the clock ILLUSTRATION: Dual Rack Mount Setup [ 3 ] Time Machines by CSS | 6030 South 58th St., Suite C | Lincoln NE 68516 voice: 402.261.8688 | email: sales@css-timemachines.com | web: css-timemachines.com...
IP address displayed on the clock when the button is double-clicked for the URL. This should bring up the login screen of the clock. The default password is “tmachine”. [ 4 ] Time Machines by CSS | 6030 South 58th St., Suite C | Lincoln NE 68516 voice: 402.261.8688 | email: sales@css-timemachines.com | web: css-timemachines.com...
4.2.7 Channel and RSSI Channel and RSSI are read only parameters for information about WiFi performance. [ 5 ] Time Machines by CSS | 6030 South 58th St., Suite C | Lincoln NE 68516 voice: 402.261.8688 | email: sales@css-timemachines.com | web: css-timemachines.com...
(time.nist.gov) and IPv4 (192.43.244.18) formats are accepted. The clocks will work best if allowed to access a time server on the local network rather than an Internet based time source. The Time Machines TM1000A is an [ 6 ] Time Machines by CSS | 6030 South 58th St., Suite C | Lincoln NE 68516...
PM hours will display a dot in the lower left corner of the display. (In 24 hour mode there will be no indication of AM or PM) [ 7 ] Time Machines by CSS | 6030 South 58th St., Suite C | Lincoln NE 68516 voice: 402.261.8688 | email: sales@css-timemachines.com | web: css-timemachines.com...
NOTE* If a constant display of the date is desired, the “Time” field can be set to 0 seconds, and the “Date” field can be set [ 8 ] Time Machines by CSS | 6030 South 58th St., Suite C | Lincoln NE 68516 voice: 402.261.8688 | email: sales@css-timemachines.com | web: css-timemachines.com...
This parameter allow the user to control the brightness of the display. There are three settings that are selectable. • DEFAULT, the brightest setting • MEDIUM • LOW, the lowest setting. [ 9 ] Time Machines by CSS | 6030 South 58th St., Suite C | Lincoln NE 68516 voice: 402.261.8688 | email: sales@css-timemachines.com | web: css-timemachines.com...
External connection will require the user to make a connection from the clock's internal relay to an external system. The Time Machines Clock alarm closes an internal relay. The pinout of the connector is as follows: ILLUSTRATION: Connector for Relay...
NTP server. At which point the AM/PM LED's will display the correct pattern corresponding to the current time. [ 11 ] Time Machines by CSS | 6030 South 58th St., Suite C | Lincoln NE 68516 voice: 402.261.8688 | email: sales@css-timemachines.com | web: css-timemachines.com...
This will not affect the function of the clock only the web page access. -Some of the lesser known and/or older web browsers may not be compatible with the Time Machines web interface. Try using a different browser such as Firefox or Chrome.
Need help?
Do you have a question about the 760-240W-000 and is the answer not in the manual?
Questions and answers