Do you have a question about the SGM4003 and is the answer not in the manual?
Questions and answers
Summary of Contents for Rhyas SGM4003
Page 1
SPRAY GUN 120W SGM4003 Original Instructions...
Page 4
By doing so you now have an excellent product, applications mentioned delivered by one of Europe’s leading suppliers. All products delivered to you by Rhyas are • using the tool for different applications, or with manufactured according to the highest standards different or poorly maintainted accessories, of performance and safety.
Page 5
Additional safety instructions We accept no responsibility for damage • NEVER SPRAY AT PERSONS - Never aim caused by the use of unsuitable the nozzle at another person or animal. Never substances, or paints that have not been allow the spray to come into direct contact with thinned correctly, and any health hazards the skin.
Page 6
should not be sprayed, using a good quality Spraying masking tape. The paint or fluid to be sprayed Fig. C should be thoroughly mixed and free from lumps Fill the paint container with the correctly thinned or other particles. Many substances can be and strained paint.
Page 7
4. MAINTENANCE 5. No spray, no sound • No electricity. Make sure that the machine is not live • Check power supply. when carrying out maintenance work on the motor. 6. Operating sound not right • Poor output adjustment. This machine has been designed to operate •...
Page 8
If your spray gun should require extra internal cleaning, it may be necessary to disassemble it. If so the following action should be taken: • Remove the plug from the mains socket. • Remove paint container, pick up pipe and filter. •...
Page 9
Spare parts list Position Description Nozzle 402415 Locknut 402416 3 - 6 Piston complete 402417 Regulator unit 402418 18, 19 Switch complete 402419 Suction tube 402420 Container 402421...
Page 10
GENERAL SAFETY INSTRUCTIONS c. Avoid accidental starting. Ensure the switch is in the off position before plugging in. Carrying power tools with Warning! your finger on the switch or plugging in power tools that Read all instructions. Failure to follow all instruc tions listed have the switch on invites accidents.
Page 11
DECLARATION OF CONFORMITY SGM4003 (EN) We declare under our sole responsibility that this product is in conformity with directive 2011/65/EU of the European parliament and of the council of 9 June on the restriction of the use of certain...
Need help?
Do you have a question about the SGM4003 and is the answer not in the manual?
Questions and answers