Advertisement
Usage manual
Before using this product, read this manual carefully and retain it for future reference.
Device introduction:
<1> Connect to the Wii™ Remote.
<2> USB port, connect to the Wii™/Wii U™ console.
<3> "-" button.
<4> "+" button.
<5> USB port, connect to the Xbox 360™ controller.
<6> Rapid fire indicator.
Advertisement
Table of Contents
Summary of Contents for Maxgear Cross fight
- Page 1 Usage manual Before using this product, read this manual carefully and retain it for future reference. Device introduction: <1> Connect to the Wii™ Remote. <2> USB port, connect to the Wii™/Wii U™ console. <3> “-” button. <4> “+” button. <5> USB port, connect to the Xbox 360™ controller. <6>...
- Page 2 <7> Rapid fire button. How to connect: First connect the USB cord from Maxgear Cross fight to Wii™ or Wii U™ console, then plug in the Wii™ Remote and Xbox 360™ wired controller to the device (Maxgear Cross fight) , after that turn on the Wii™...
- Page 3 If you want to set the A button with rapid fire function, the setting procedure is as below: 1. Press the T button <7> on the device (Maxgear Cross fight), the <6> LED indicator lights up, now press the A button on the 360 wired controller, the <6> LED indicator lights off, the rapid fire function on the A button is enabled, if you want to erase the rapid function on this key, simply repeat the steps again.
- Page 4 3. The <6> LED indicator will light up if the rapid fire setting button is pressed. 4. The rapid fire speed can be adjusted via the “+”and“-” button. There are 4 rapid fire speed level built-in: (Fast, Medium and slow and slowest) –...
- Page 5 Maxgear Cross fight adapter firmware can be updated via PC. More information can be found on our web site www.maxbuy.cc...
Need help?
Do you have a question about the Cross fight and is the answer not in the manual?
Questions and answers