Offline Clone; Sleep Mode; Partition And Formatting - Inateck fd2002 Instruction Manual

Offline clone

a. This product supports offline duplicate function which can clone the HDD directly without
connecting to computers by USB port.
b. Insert the HDDs to "A"&"B", A is the HDD to be cloned, B is the target HDD to cloning,
HDDs capacity requires B≥A
c. Start cloning: Press "Clone" button on the product about 3 seconds, when release the
button "The LED indicator of 100% will light up", and quickly click "Clone", then it start
cloning. Indicator lights (25%, 50%, 75%, 100%) flash up in turn during cloning, and
whole lights on after completion. Cloning is done.

Sleep Mode

a. After finishing cloning HDDs under offline duplicate mode, product goes to sleep mode
if there were no operations in 30min and HDDs stop running. Power Indicator light
flashes up every 3 seconds, and other progress indicator lights and disk light still work,
that means clone is done and goes to sleep mode without any operations. HDDs will
wake up again to stand-by mode by press clone button shortly.
b. When USB3.0 port connects to computer, product goes to sleep mode if there were no
reading or writing on hard disk in 30min and HDDs stop running. Power Indicator light
flashes up every 3 seconds, and disk light keeps working. LED lights flash up when
computer reads and writes again.

Partition and Formatting

If your HDD has been partitioned, please connect directly with docking station to use. It will
be showed "New Disk" in computer.
If not, in the premise of system can correctly identify HDD, you can use the partition and
formatting program come with system to do it, or third-party software (such as Fdisk, DM,
PQ Magic, etc.) to do it. (The following comes to Win7 system partition and format for
example.)