The Timer - Setting The Clock - Philips CRT Television Directions For Use Manual

Y our television comes with an on-
screen clock. During normal oper-
ation, the clock appears on the screen
when the STATUS button is pressed or
if the TIMER DISPLAY control is
turned ON.
Press the MENU button on the
remote control to show the on-screen
menu.
Press the CURSOR DOWN but-
ton twice to highlight FEATURES.
Press the CURSOR RIGHT but-
ton and the menu will shift to the left.
TIMER will be highlighted.
With TIMER selected, press the
CURSOR RIGHT button again to
shift the display left and highlight the
TIME control.
Press the CURSOR RIGHT but-
ton again to highlight the time indica-
tor area.
Press the CURSOR LEFT or
CURSOR RIGHT button to select
the position or digit you wish to enter.
Press the CURSOR UP or CUR-
SOR DOWN button to select the
digits for the time. Or press the
NUMBERED buttons to enter the
correct time.
Press the CURSOR RIGHT but-
ton to move to the AM or PM posi-
tion.
Press the CURSOR UP or
DOWN button to set AM or PM.
10
Press the STATUS button to
remove the menu from the screen.
S H
MART ELP
Remember, be sure to press
0 first and then the hour num-
ber for single-digit entries.
The TVÕs clock settings may be lost
when the TV is unplugged (or when
AC power to the set is interrupted).
T T – S
HE IMER
PICTURE
SOUND
FEATURES
INSTALL
SLEEP
TV SOURCE STATUS
REPEAT REPEAT
A-B
DVD
1
SOUND
MENU
6
VOL
2
T/C AUDIO
7
9
PREVIOUS ZOOM
REVERSE STOP
INCR.SURR.
C
ETTING THE
TIMER
AutoLock
CLOSED CAP
FORMAT
BLUE MUTE
POWER
10
CC CLOCK
7
SHUFFLE SCAN
A/CH
9
7
5
PICTURE
4
3 6
OK
CH
MUTE
FTS ANGLE
SUBTITLE NEXT
PLAY FORWARD
11
PAUSE SURF
OPEN/CLOSE
POWER
SLEEP
TV SOURCE STATUS CC CLOCK
REPEAT REPEAT SHUFFLE SCAN
A-B
11
DVD
SOUND PICTURE
10
LOCK
FEATURES
TIMER
TIMER TIME
AutoLock START TIME
CLOSED CAP STOP TIME
FORMAT CHANNEL
BLUE MUTE TUNER MODE
FEATURES
FEATURES
TIMER
TIME _ _:_ _ AM
START TIME
STOP TIME
CHANNEL
ACTIVATE
FEATURES
TIMER
TIME 10:30 AM
START TIME
STOP TIME
8
CHANNEL
ACTIVATE
NOTE: The TIME (Clock) fea-
ture can be accessed directly by
pressing the CLOCK button on the
remote control, and then by simply
following steps 5 through 10 to
complete the task.
FEATURES
TIMER
TIME _ _:_ _ AM
START TIME
STOP TIME
CHANNEL
ACTIVATE