Led Indicators; Setting The Temperature - Danfoss RET1000 B User Manual

LED Indicators

Power On – Green (bottom right)
GB GB
Thermostat output on – Red (top left)
(RET1000B only - to conserve battery power the LEDs will
DE
illuminate for 5 seconds after the dial is moved depending on
status. In normal conditions the thermostat remains operational.
DK
When the battery is low the Power On LED will fl ash every
minute, replace batteries as soon as possible to maintain control
of the heating).
ES

Setting the temperature

FR
Turn setting dial to required temperature.
NL
For best comfort control initially set the dial to a lower
temperature than desired, say 18°C. Then turn it up by one
RU
degree each day until a comfortable temperature is reached.
TR
6 RET1000