1. SAFETY WARNING This product has been manufactured to comply with international safety standards. Please read the following safety precautions carefully. MAINS SUPPLY : 90-260V AC 50/60Hz Operate this product only from the type of power supply indicated on the marking label.
Page 5
LIGHTNING, STORM or NOT IN USE: Unplug the product from the wall outlet and disconnect the antenna during a thunderstorm or when left unattended and unused for long periods of time. This will prevent damage to the unit due to lightning and power-surges. EXTRANEOUS OBJECTS: Do not insert anything through the openings in the unit, where they can touch dangerous voltage points or damage parts.
2. QUICK SETUP 1. Check accessories Please check the giftbox for completeness of accessories. Included should be: Receiver, Remote Control, User Manual, 2 Batteries, and power adapter. 2. Connect the Receiver to the TV Set Connect your Receiver with your TV Set. Details can be found in the User Manual under chapter 4.
3. GENERAL FEATURES • SD / HD support (MPEG4 AVC/H.264) • User friendly Installation • 1 Conax CAS Smartcard-Reader • USB PVR Function (by using external HDD) Time Shift Mode (by using external HDD) 1 Channel recording, 2nd Channel watching on same TP (by using external HDD) •...
4. HOW TO CONNECT YOUR RECEIVER Please note: HD Signals are not transferred via RCA-Video – For HDTV Signals and also for the best quality on SDTV please use an HDMI cable when possible. 4.1 Connecting the Receiver to TV by using HDMI Connect the coaxial cable to “CABLE IN”...
5. HARDWARE DESCRIPTION: 5.1 Remote Control unit POWER. By pressing this button, the receiver will go into standby mode. When the receiver is in standby mode, it can be awakened by pressing this button again. Once configured for TV remote control, this button is for TV power on/off.
Page 10
Cursor UP: By pressing this button, the user can jump to next channel on the channel list. In menu structure, user can move up one row. Cursor LEFT: By pressing this button, the user can decrease the audio volume level of the receiver. In menu structure, user can change between selectable options.
Page 11
5.2 FRONT PANEL 1. SMARTCARD SLOT 2. MENU BUTTON 3. VOLUME UP & DOWN 4. POWER BUTTON Switch on- and off (Stand-by). 5. OK BUTTON 6. CHANNEL UP & DOWN Switch on- and off (Stand-by). 7. 7-Segment Display In operation displays the current channel number...
Page 12
5.3 Rear Panel Name FUNCTION Input for Cable Signal CABLE IN LOOP OUT Loop Through for Cable Signal S/PDIF Coax. Digital Audio Output coaxial HDMI High-Definition Digital Video/Audio Output AV OUT Audio and Video Output USB 2.0 Port 12V = 1A Connection for external Power Supply...
WATCHING TV This chapter describes how to watch TV and listen to Radio using the receiver. Thanks to the advantages of Digital TV transmissions, extra features are added to the broadcast, such as information about the current and next program and extra options such as the ability to choose between different languages for Audio and Subtitling.
Page 14
6.3 EPG (Electronic Programme Guide) Now & Next as well as 7 days Programme Information EPG application can be activated by pressing the EPG key when watching a TV- programme or listening to a Radio Channel. EPG application is divided into two levels. The first level gives an overview of 12 continuous channels with information about present and forthcoming programmes.
Page 15
Navigating on the second level of EPG By pressing the GREEN key (TOGGLE) the second level EPG will appear. This application provides complete information for the selected channel. It is possible to scroll between programs in chronological order for a particular day with the CURSOR UP and CURSOR DOWN keys.
Page 16
6. 5 Teletext Teletext application can be activated/deactivated by pressing the TEXT / BLUE key. The following operations are supported after activating Teletext: • After activating text page 100 will appear after a short time. • Specific Teletext pages can be selected using the number keys. If the Teletext page is currently not available, the last selected page will remain on the screen.
Page 17
6. 6. 4 Playback After pressing the FILE LIST key a list is displayed which contains all the recorded programmes on your connected external USB HDD. Use the UP /DOWN keys to move cursor desired programme and confirm with the OK key start playback.
7. MENU OPERATION The main menu can be activated by pressing the MENU key. Main menu provides access to most important features of the receiver. These features are divided into following Menus. Each Menu contains corresponding sub-menus. The Main Menus are as following: •...
8. EDIT CHANNELS 8.1 Create Channel List (Move) This menu is used to creat or order your channel lists. Press menu key, select Edit Channels by using the RIGHT CURSOR and press OK. Select one or more channels which need to be moved using the WHITE, the UP- and DOWN-CURSOR keys.
Page 20
8.2 Edit Favorite Channels This menu is helpful in adding and deleting services to and from the favorite group. Edit favorite channels screen consist channel list (left) and favorite list (right). Buttons switch cursor between both lists. When cursor is on channel list (left) below functions are available: Add (Red button): Adds channel currently marked by cursor channel to actual favorite list (right) A_Z (Green button): Sorts Channel list in alphabetical order.
9. INSTALLATION This menu contains following items: • Manual search cable • Default Setting 9.1 Manual Search In Manual Mode the search begins with the Start frequency. Depending on the cable Network, choose “Network Scan” on for a fast search for all channels.
9. 2 Default Setting In this menu, you can delete channels for TV or radio. And also do factory reset about Channels, Configuration Default Setting. 10. USER SETUP By using the CURSOR keys you can select: - Language Setting - Time Setting - Parental Control - A/V Control - OSD Setting...
Page 23
10. 2 Time Setting This menu contains Time Setting, Summer Time and GMT Offset. Select “ Manual ” or “ Auto ” mode using CURSOR LEFT or CURSOR RIGHT key and with OK to confirm. If you want to change the time and date manually in time offset menu,...
Page 24
10. 4 A/V Control In the Audio/video menu, you can modify the properties of the audio and video signals to suit your TV and audio equipment. • TV Type: User can select the video format consistent with your TV • Display Format: The options are: - Pan &...
11. MULTIMEDIA (only with connected and operational external HDD) In this Sub Menu you can make some settings for your connected Hard-Disk- Drive for the PVR Operation and also format the HDD. The Sub Menu includes the following functions: • Record List •...
Page 26
11.3 HDD Properties In this Sub Menu you can see all information about your connected Hard-Disk Drive as well as an option to format the HDD HDD Information: Displays the file system, the total and the used capacity. HDD Speed: Check the speed of the connected USB HDD and see if it meets your requirements.
12. CONAX SMARTCARD READER This product is also equipped with one Smartcard Reader for CONAX CA. Only if necessary: 1. Open the flap on the front panel of the product. 2. Insert the smartcard into the smartcard slot with the chip facing downwards. 13.
14. TROUBLESHOOTING Problem Possible causes Remedy LED on front Connect power cord AC Power cord panel does not properly into the power disconnected light socket No picture or Wrong connection of the Connect two terminals sound Video/audio output to TV correctly With HDMI cable input terminal or RCA or RF cable...
15. MANUFACTURER INFORMATION Dear customer, If you require technical assistance and your dealer or installer was not able to help, please contact our technical support.
Page 30
HOW TO SET UP YOUR UNIVERSAL RCU 1.Initial Setting 1.1 DEVICE DEFAULT : STB 1.2 MODEL DEFAULT STB ---------------- #001 TV ---------------- #001 DVD ---------------- #001 VCR ---------------- #001 AUDIO ---------------- #001 AUX ---------------- #001 2.DEVICE KEYS 2.1 DEVICE KEY (STB, TV, DVD, VCR, AUDIO, AUX) is to chang the device. 3.Setting Number Call 3.1 In case of normall setting 3.1.1 Press [DEVICE + OK] keys for 1 second more.