Table of Contents
Advertisement
2
2
Preparation
10 cm
5 cm
3
28241/p2-9
Installing the TV
4
Place your TV set on a stable and strong
base.
4
Leave at least a free space of 5 cm on both
5 cm
sides and 10 cm from the top for good
ventilation of the TV set.
4
Do not place anything on the TV set which
might damage it e.g. plants or heat sources.
Connecting the aerial
4
Insert the aerial plug into the socket g at
the back of the TV.
Connecting the mains
4
Insert the mains plug into the wall socket
and switch on.
Refer to the specification at the back of the
TV for the correct operating voltage.
(Picture is only a representation of the actual
plug and socket)
Switching on
4
Press the on/off button at the front of the
TV to switch it on.
4
If the indicator is red, press either the digit,
channel, A/CH, AV or B key.
Installing the remote control
4
Remove the cover at the back of the remote
control.
4
Insert the correct type and size batteries
into the compartment, making sure that
they are the right way around.
2
7/6/00, 3:10 PM
Advertisement
Table of Contents
