Disassembly Instructions; Dismantling Of The Main Board; Dismantling Of The Power & Tuner Board - Philips HTR5000 Service Manual

www.nostatech.nl

DISASSEMBLY INSTRUCTIONS

1) Loosen 9 screws and remove the Top Cover by lifting the rear portion upwards before sliding it out
towards the rear.
- 5 screws on the back
- 2 screws each on the left & right side
2) Loosen 7 screws & lift up the top edge of Front Panel assembly to free some catches before sliding
it out towards the front.
- 4 screws on the bottom
- 1 screw "A" on the inside as indicated in Figure 1 or Figure 2.
- 1 screw each on the left & right side
1
Figure 1

Dismantling of the Main Board

1) Loosen 4 screws "B" on the top of main board as shown in figure3.
2) Loosen 8 screws "C" at the back panel as shown in figure4.
3-1
A
Figure 2
B
Figure 3
Dismantling of the Power & Tuner Board
1) Loosen 5 screws " D " on the top of power board as shown in figure 5.
2) Loosen 4 screws " E " on the top of tuner board as shown in figure 6.
www.nostatech.com
3-1
C
Figure 4
D
Figure 5
E
Figure 6