Sound Menu Controls; Dolby Virtual - Philips 30PW8420 User Manual

T
o adjust your TV sound, select and use the Sound
Menu Controls listed below:
Treble: Press the CURSOR r
1
to adjust the control. The control will enhance the
high frequency sounds.
Bass: Press the CURSOR r
2
adjust the control. The control will enhance the low
frequency sounds.
Balance: Press the CURSOR r
3
to adjust the level of sound coming from the left
and right speakers.
AVL: (Auto Volume Leveler) Press the CURSOR
4
r or s r s buttons to turn the control On or Off.
When On, AVL will level out the sound
being heard when sudden changes in volume occur
during commercial breaks or channel changes.
Incr. Surround: Press the CURSOR r
5
buttons to select between Dolby Virtual or Stereo
settings (If Stereo), or select Spatial or Mono (If
Mono).
SAP: Press the CURSOR r
6
to toggle this control to On or Off. SAP is short
for Secondary Audio Programming and is sent as a
third audio channel, a SAP signal can be heard
apart from the current TV program sound.Note: If
SAP is not present on a selected show No SAP
will appear on the screen.
Sound: Press the CURSOR r
7
to select between Stereo or Mono settings. Note: If
Stereo is not present on a selected show and the
TV is placed in the Stereo mode, the sound coming
from the TV will remain in the Mono mode.
S
OUND
r or s s buttons
r or s s buttons to
r or s s buttons
r or s s
r or s s buttons
r or s s buttons
M C
ENU ONTROLS
Main
Picture
Sound
Features
Install
Treble
Bass
Balance
AVL
Incr. Surround
Incr. Surround
SAP
Sound
10
Treble
Bass
Balance
AVL
Incr. Surround
More...
50
50
L R
On
or Off
Spatial
or Mono

Dolby Virtual

or Stereo
On
or Off
Mono
or Stereo