Advertisement
Page 3
Installing the camera in 3 steps:
- Power the camera on. The fan should start rotating immediately.
The Titan is USB powered, so no need to have external power un-
less you need to turn on the cooler.
2 - Plug the USB cable into the camera, then into your computer. A
"New hardware found" message should immediately be visible.
3 - When asked for the drivers, point to the \Drivers folder on your
CD-ROM drive.
That's it! The camera is now installed and ready to use.
Installing the Capture application
Your camera comes with a simple and easy-to-use application called
"Artemis Capture", which provides functions for image capture and
display; camera configuration; telescope focusing; autoguiding;
and image sequencing with an optional filter wheel. Images can be
saved in several popular formats for further processing with your
favorite image processing application.
To install Artemis Capture, 'simply run the installation file SetupAr-
temisUniversal on your CD and follow the prompts. During instal-
lation, you will be asked if you want to install optional plug-ins for
popular image capture applications. Plug-ins are supplied for Maxim
DL™, AstroArt, and CCDSoft™.
Advertisement
