This manual contains technical information and operating notes about devices of the type: FB-606 Infrared Manual Remote Control FB-606 TF Infrared Manual Remote Control tropicalized It gives important information about the device. Please read this manual carefully before using the device! It will ensure smooth operation and prevention of errors, defects and damage to the system.
Instruction manual FB-606 General information and safety 1.2 Symbols in the Documentation There are warning instructions and symbols in this description. It is absolutely mandatory to comply with these and follow them. These are working aids and they will warn you of possible damage to property and personnel.
1.5 Conformity Devices made by LJU Automatisierungstechnik GmbH have been designed to comply with EU direc- tives. Please contact LJU Automatisierungstechnik GmbH if you wish to obtain a copy of these EU declara- tions of conformity. BDA_0002_FB-606_en...
FB-606 General information and safety 1.6 Proper use The infrared manual remote control FB-606 is only used to manually control LJU controllers (e.g. LJU vehicle controllers) that have the accompanying software and are fitted with a LJU infrared interface. Warning! Danger due to improper use! Any improper use and/or different use of the device can lead to dangerous situations.
Internet; see contacts on the inner side of the covering sheet (page 2). 1.10 Modifications and alterations To avoid danger and to ensure optimal performance, no modifications, remodelling or add-ons are allowed on the device unless expressly approved by LJU Automatisierungstechnik GmbH. Warning! Risk of injury due to design modification! Unauthorized technical modifications can lead to considerable damage to persons and property.
Instruction manual FB-606 General information and safety 1.11 Personnel and qualification Warning! Risk due to improper use! Improper operation can lead to serious damage to persons or property. Therefore: It may be operated only by qualified technical personnel. During manual operation, ensure that there is no risk to persons from the manual operation and that there are no persons in the working area of the vehicle.
The FB-606 supports two IR transmission speeds. Therefore it is compatible with LJU vehicle control- lers of the 5xx, 6xx and 7xx series as well as LJU vehicle controllers of the latest generation 8xx. The remote control permits the switching of LJU controllers to manual mode (hand mode) so that e.g.
The housing of the infrared remote control FB-606 is made of impact-resistant plastic. The Keypad with 6 buttons on the remote control is simply to use and protected, which helps prevent the buttons from being accidentally pressed.
The buttons on the remote control are recessed, which helps prevent the buttons from being acci- dentally pressed. 3.2 Selection of the transmission speed The infrared manual remote control FB-606 supports two infrared transmission speeds. Mode Description Control-LED is blinking fast...
Operation of the FB-606 3.3 Functioning The 6 operating buttons on the remote control are used to remote control LJU controllers and to acknowledge errors. The commands are transmitted via infrared. The control LED of the remote control is blinking when a...
Instruction Manual FB-606 Operation of the FB-606 Example button assignment: Button Function Switching to manual mode resp. error reset Normal mode (automatic mode) Travel forward slow Travel forward fast Travel backward slow Travel backward fast ...
Instruction manual FB-606 Data sheet FB-606 4 Data sheet FB-606 General Type FB-606 FB-606 TF 60060830 60608103 Housing impact-resistant plastic Colour black Dimensions H x W x D 145 mm x 65 mm x 26 mm Weight 120 g IP protection class...
Need help?
Do you have a question about the FB-606 and is the answer not in the manual?
Questions and answers