Function Keys - Promax GV-698 Plus Manual

PDC ON
When pressing this key with the LED turned on activates function PDC
(Program Delivery Control). With the lower LED of DISPLAY SELECT turned
on, the information that appears in field CHANNEL corresponds to the country
information. The possibilities are SPA (Spain), UK (United Kingdom), GER
(Germany) y FRA (France). Between field CHANNEL and CH-FREQ appears
the information of status STA (Start), STO (Stop) and PAU (Pause). In field
CH_FREQ the time in minutes of the programming of signal VPS appears. The
possibilities are 1m and 5m. The information of month (1), day (1) and hour (1)
is fixed. The choice between the different possibilities is done with the encoder
selecting first the field and then the function.
Signals VPS and PDC always contain the same information.

4.2.3 Function keys

BURST OFF
With the LED turned on there is no burst signal.
CHROMA OFF
With the LED turned on there is no chroma signal.
VIDEO EXT
With the LED turned of the RF signal gets modulated by the video that enters
the SCART.
STEREO DUAL
With field SOUND in condition NICAM or Zweiton the LED ON indicates wether
the signal is dual or stereo.
16:9 ON
With the LED turned on the signal is in anamorphic format (16:9).
CIRCLE ON
With the LED ON a circle appears in all the signals except in the colour bars.
SCART ON
With the LED turned on the switch signal of the SCART connector is activated.
This signal activates the video/audio signals present at the SCART connector
as per the following table.
SCART ON
ON
OFF
ON
OFF
Page 22
RECEIVER RESULT
ON Without communication (it depends on the
type of receiver).
ON SCART connector inputs active
OFF SCART connector outputs active. If the
function 16:9 ON is selected, the switch signal
will make the 16:9 commutation.
OFF Without communication
Colour pattern generator GV-698+
06/2016