Maytag DWU5910AAX User Instruction page 10

_lr_7 ::7:::_T_ L:C:.?::_ Z_ _-_:_ :::_ :LtC_:%: _:": _ --::E-:_:Y::::_-:;_7"_:_:'_: __L-_::_ ---_ _::_:"%_:_ ::::%_:_ _V_ -_--_:_;':_: _:_: B __ _
Options: To Start Dishwasher:
Temp Boost Sensor:
After
loadingset
the
dialto the
desired
cycle.
Press button for desired options.
Press the On button to assure the water is
heated to proper temperature for best cleaning NOTE: Run the water from the hot water tap to
and drying results, If the water temperature is clear the line of cold water before
low, the main wash will be extended and the starting.
Heating Delay light will turn on. Press the door until it latches. The cycle will
Press the Off button to cancel the Temp Boost begin with a drain prior to fill and the On
Sensor. indicator will light.
Heated Rinse and Dry Options: Indicator Lights:
RINSE TEMP The On light indicates that the dishwasher is
Press the Sani button to turn the heating operating.
element on during all rinses. The Sani option The Heating Delay light indicates that the main
helps maintain water temperature and improve wash is being extended to heat the water to
drying results.
proper temperature.
Press the Normal button if Sani is not desired. At the end of the dry phase the Clean light will
The heating element will be turned off in all remain lit until the dial has been advanced.
rinses.
FAN DRY
Adding a Forgotten Item:
Press the Heat button to turn the heating For best cleaning, the forgotten item should be
element on during the fan dry period. This added early in the cycle.
option provides faster drying. 1, Unlatch the door and wait until the sound of
Press the Air button to turn the heating element circulating water stops.
off during the fan dry period. "2,Open the door and add the item,
NOTE: Temp Boost Sensor, Rinse Temp and
Fan Dry options can be used separately 3. Pause before latching the door. The cycle will
or together, continue at the point it was interrupted.
PAGE 9