Bush A626N Service Manual page 11

Features Menu
The Features menu in TV mode shows as below. This menu gives users the most flexibilities to satisfy their
generally demands. According to the various requirements in different source modes, certain features should be
hidden (disable) on the menu. The details footnotes will be described clearly below.
1. Menu Language: To select the on-screen display menu language.
2. Picture Format: To select the available display format from Auto, Normal, Native (HDMI only), Zoom 1, Zoom2,
or Wide.
3. Time:
[Time Zone] - To select the time zone you are in.
[Time] - To set the time and date or select auto synchronization. Tip: Before you want to set the time and date by
your own, please make sure Auto synchronization is Off.
[Sleep Timer] - To set the TV to turn itself off within a certain time.
4. Subtitle:
[Analog Subtitle] - To display the transmitted subtitle on the screen. Either this text can be permanently displayed
(assuming that the service is available in the broadcast) or only when mute is active.
[Digital Subtitle] - Use the Digital Subtitle function when two or more subtitle languages are broadcasted. If subtitle
data in a selected language is not broadcasted, the default language subtitle will be displayed.
[Subtitle Type] - To choose the subtitle type from normal or hearing impaired.
5. Teletext Language:
[Digital Teletext Language] - To select the teletext language.
[Decode Page Language] - To set the teletext language to the regional location.
6. Comon Interface: This menu appears with your CI supplier information.
7. HDMI Scan Info (HDMI only):
[Automatic] - Set to underscan or overscan automatically when the video signal is detected.
[Underscan] - When the video signal is detected, all active pixels and lines are displayed with or without border.
[Overscan] - When the video signal is detected, some active pixels and lines at the edges are not displayed.
8. Reset Default: To reset all TV settings to the original factory values.
11