Advertisement
QUICK REFERENCE
1
Attach your antenna to the back of the television.
Use the remote control unit by pointing it towards the
(See page 8.)
remote control sensor on the TV. Objects between the
remote control unit and the remote control sensor may
2 Connect the AC plug for the television into the AC
prevent proper operation.
outlet.
o ii 7 i
i'I "
¯ Place the TV close to the AC outlet, and keep the power
30 °
plug within reach.
~
"~
¯ TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT
TOUCH UN-INSULATED PARTS OF ANY CABLES
~ Cautions regarding the remote control unit
WITH THE AC CORD CONNECTED.
¯ Do not expose the remote control unit to shock. In addition,
do not expose the remote control unit to liquids, and do not
3 Bundle the cords properly with the cable clamp,
place in an area with high humidity.
¯ Do not install or place the remote control unit under direct
~ _~,i
sunlight. The heat may cause deformation of the remote
i~-- -~"
control unit.
i ~-
¯ The remote control unit may not work properly if the remote
i
It ~
control sensor on the TV is under direct sunlight or strong
lighting. In such cases, change the angle of the lighting
or the TV, or operate the remote control unit closer to the
remote control sensor.
4 How Io turn or~ the television for the first Iime,
A) Press POWER on the television.
~
.......... POWER
~~
IMPORTANT:
The POWER indicator on the television should light GREEN
indicating you have power to the television.
B) The POWER indicator on the front of the
If the POWER indicator on the television still does not light up,
television lights GREEN.
press TV POWER on the remote control to turn the power on.
IMPORTANT:
TELEVISION FROM THE OUTLET AND REPEAT THE
INSTALLATION STEPS.
IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT
US AT 1-800-BE-SHARP.
POWER indicator
5 inse-~ the batteries into the rimote control unit. (See
page 8.)
¯ Speakers cannot be detached from the TV.
¯ TV angle cannot be adjusted.
Attach your antenna to the back of the television,
page
2
Connect the AC
outlet.
for the television into the AC
'----..,:r--c::J:
o ,
.. Place the
TV
close to the
AC
outlet, and keep the power
plug within
.. TO PREVENT RISK OF ELECTRIC
4
TOUCH UN-INSULATED PARTS OF ANY ....
,...,OLl:::'"
WITH THE AC CORD CONNECTED.
first
tirne,
........ , POWER
B)
The
POWER
indicator
the
of
television
GREEN,
9
0
i
POWER
from
TV,
Use the rernote control
rernote control sensor on the
between the
rernote
unit and the rernote control sensor rnay
prevent proper
IT
m)
Remote control sensor
30° _ _ : _ _
II Cautions
the remote control unit
.. Do not expose the remote control unit to shock, In aclclition,
do not
the remote control unit to liquids,
do not
in
with
humidity,
..
not install or
remote control unit uncler clirect
The
may cause deformation of the remote
IMPORTANT:
The POWER indicator on the television should light GREEN
you have power to the television,
If the
inclicator on the television still cloes not light up,
TV POWER on the
control to turn the power on,
IMPORTANT:
IF THE UNIT DOES NOT POWER ON
UNPLUG THE
TELEVISION FROM THE OUTLET AND REPEAT THE
INSTALLATION STEPS,
IF YOU STILL ENCOUNTER NO POWER, PLEASE
US AT 1-800-BE-SHARP,
®
7
Advertisement
