Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for AJA GEN10
- Page 1 GEN10 HD/SD Sync Generator User Manual May 19, 2008...
- Page 2 AJA Video, with shipping charges prepaid. AJA Video shall pay for the return of the product to the Customer if the shipment is to a location within the country in which the AJA Video service center is located.
- Page 3 AJA GEN10 HD/SD Sync Generator User Manual — Introduction Introduction The GEN10 is a cost effective and flexible SD/HD/AES sync generator. The GEN10 features 7 outputs including 2 groups of independently controlled SD/HD sync outputs and 1 AES-11 output. The SD outputs can be switched between Color Black or Color Bars.
- Page 4 Power LED: When Green, this LED indicates Converter the GEN10 is powered up. GEN10, Side View User Controls The user interface for the GEN10 is an DIP Switch Setting 8-switch DIP accessible through a cut- LEFT RIGHT out in the bottom of the unit. Use the DIP switches to configure outputs and...
- Page 5 AJA GEN10 HD/SD Sync Generator User Manual — User Controls Switch 1 (OUT 1-4)—Switches outputs 1-4 between SD and HD sync LEFT (SD) RIGHT (HD) Selects SD Sync Selects HD Sync Switch 2 (OUT 5-6)—Switches outputs 5-6 between SD and HD sync...
- Page 6 1=ON, 2=ON, 3=ON Switches Back of GEN10 (where DIP switch To keep an access can be seen) “uninstalled” jumper for future use, you can place it over only a single pin GEN10 Internal Jumper (remove back of case to access)
- Page 7 AJA GEN10 HD/SD Sync Generator User Manual — Specifications Specifications Item Specification HD Sync Tri-level SD Sync Color Black, 75% Color Bars AES-11 Output AES-11, 48KHz, Silent or 1KHz Tone (-20dBFS for NTSC, -18dBFS for PAL), 1 BNC Video Sync Outputs Assignable in two groups to either HD or SD: 4 BNCs—Outputs 1 to 4...
Need help?
Do you have a question about the GEN10 and is the answer not in the manual?
Questions and answers