Philips 27PT5441, 32PT5441, 27PT6441, 27PT6442 User Manual page 17

A
13
UTOMATICALLY
Y
our TV can automatically set
itself for local area (or Cable
TV) channels. This makes it easy
for you to select only the TV sta-
tions in your area when the
CHANNEL (+), (–) buttons are
pressed.
Note: Make sure the antenna or
cable signal connection has been
completed before AUTO PRO-
GRAM is activated.
1
Press the MENU button on
the remote to show the on-
screen menu.
2
Press the CURSOR UP 3
or DOWN 4 buttons to
scroll through the on-screen
menu until the word Install
is highlighted.
3
Press the CURSOR RIGHT
2 button to display the
`
Install menu features.
4 Press CURSOR UP 3 or
DOWN 4 buttons to scroll
the Install features until the
words Auto Program are
highlighted.
5
Press the CURSOR RIGHT
2 button to start the Auto
Program scanning of chan-
nels. Auto Programming will
store all available channels
in the TV's memory then
tune to the lowest available
channel when done.
6
When finished, press the
STATUS /EXIT button to
remove the menu from the
TV's screen.
P
ROGRAM
Main
Picture Brightness
Sound Color
Features
Picture
Main
Install Sharpness
Tint
More...
2
Install
4
6
1
3
2
VOL
Auto Program
5
4
Auto Program
Auto Program
H H
ELPFUL
When CABLE is selected, channels 1-
125 are available.
When ANTENNA is selected, chan-
nels 2-69 are available.
When AUTO is selected, the TV will
automatically set itself to the correct
mode based on the type of signal it
detects when the AUTO PROGRAM
feature is activated.
Picture Language
Sound Tuner Mode
Features Auto Program
Install Channel Edit
Language
Tuner Mode
Auto Program
Channel Edit
Channel 12
Channel 13
Channel 14
INTS