Setting Up Access Code To Block Channels - Philips 26PW9100D User Manual

SETTING UP ACCESS CODE TO BLOCK CHANNELS

O
ver the next few pages you'll learn how to block channels and get a better understanding of the ratings used for
certain programming.
Follow these steps for Digital Mode
1
Press MENU on the remote
control to display the onscreen
menu.
2
Press CURSOR < or >
until you see Features
highlighted.
3
Press CURSOR > to display
the Features menu options.
4
Press CURSOR < or
> until you see Auto Lock Auto Lock Auto Lock
highlighted.
5
Press CURSOR >. The
screen will display:
Access Code - - - -.
6
Using the NUMERIC
buttons, enter 0, 7, 1, 1.
"XXXX" appears on the
Access Code screen as you
press the numeric buttons.
Incorrect Code will appear on
the screen and you will need to
enter 0, 7, 1, 1 again.
Digital Mode
22
Follow these steps for Analog Mode
Analog Analog Mode Analog Mode
1
2
3
4
5
6
7
MENU
< >
NUMERIC
BUTTONS
Press MENU on the remote to
display the onscreen menu.
Press CURSOR < or
> until you see Features
highlighted.
Press CURSOR > to display
the Features menu options.
Press CURSOR < or >
or until you see Auto Lock
highlighted.
Press CURSOR >.
The screen will display:
Access Code - - - - .
Using the NUMERIC buttons,
enter 0711. "XXXX"
appears on the Access Code
screen as you press the
NUMERIC buttons.
Incorrect Code will appear on
the screen and you will need
to enter 0711 again.
The screen will prompt
you to enter a New Code.
Enter a new 4 digit code using
the NUMERIC buttons. The
screen will then prompt you
to CONFIRM the code you
just entered. Enter your new
code again. "XXXX" will
appear when you enter your
new code. AutoLock menu
options will be displayed if the
new code tallies with the one
you have entered earlier.