How To Auto Program Tv Channels - Philips 25PS40S99 Directions For Use Manual

H
OW TO
Y
our TV can automatically set itself
for local area (or Cable TV) chan-
nels. This makes it easy for you to
select only the TV stations in your area
when the CHANNEL (+), (–) buttons
are pressed.
Note: Make sure the antenna or cable
signal connection has been completed
before AUTO PROGRAM is activated.
Press the MENU button on the
remote to show the on-screen menu.
Press the CURSOR UP ▲ or
DOWN ▼ buttons to scroll through
the on-screen menu until the word
INSTALL is highlighted.
Press the CURSOR RIGHT
button to display the INSTALL menu
features.
Press CURSOR UP ▲ or DOWN
▼ buttons to scroll the Install features
until the words AUTO PROGRAM are
highlighted.
Press the CURSOR RIGHT
button to start the Auto Program scan-
ning of channels. Auto Programming
will store all available channels in the
TV's memory then tune to the lowest
available channel when done.
When finished, press the STATUS
/EXIT button to remove the menu
from the TV's screen.
S H
MART ELP
Try it out. Press the CHAN-
NEL (+), (–) buttons and see
which channels have been added to the
TV's memory.
If you want to delete any unwanted chan-
nels from the TV's memory, refer to the
section on adding and deleting channels
(Channel Edit) on the next page.
A
UTOMATICALLY
Main
Picture
Sound
Features
Install
1
VOL
2
4
12
P TV C
ROGRAM
Brightness
Color
Picture
Sharpness
Tint
More...
4
2
6
3
5
HANNELS
Main
Picture Language
Sound Tuner Mode
Features Auto Program
Install Channel Edit
Install
Language
Tuner Mode
Auto Program
Channel Edit
Auto Program
Channel 12
Auto Program
Channel 13
Auto Program
Channel 14