Assembly; Turning Your Smartband On And Off - Sony SWR10 User Manual

To charge your SmartBand
1
Plug one end of the USB cable into the charger or into the USB port of a
computer.
2
Plug the other end of the cable into the Micro USB port of your SmartBand.
Battery notification light status
Notification light A flashes continuously
Notification light A is on
To check the battery level of your SmartBand
1 From the Home screen of your Android™ device, tap
Smart Connect.
2 Tap Devices > SmartBand.
Low battery level notification
When your SmartBand is on and the battery level is less than 5%, your SmartBand
emits two short vibrations and a popup window in the SmartBand application notifies
you that your SmartBand is running out of battery.

Assembly

To assemble your SmartBand
1
Select the wristband that best suits you.
2
Insert the core into the wristband in such a way that the power key is inserted
underneath the power key cover.

Turning your SmartBand on and off

To turn on your SmartBand
•
Press and hold down the power key until your SmartBand vibrates.
When turning on your SmartBand for the first time, it automatically enters pairing mode and
notification light A flashes until your SmartBand is connected to a device.
This is an Internet version of this publication. © Print only for private use.
The battery is charging and is not yet fully charged
The battery is fully charged
, then find and tap
4