Safety Belt Use During; Pregnancy; Safety System Check; Safety Belt Care - Cadillac XTS Owner's Manual

2017 year
Hide thumbs Also See for XTS:
Table of Contents

Advertisement

68
SEATS AND RESTRAINTS
Rear Safety Belt Comfort Guides
Rear safety belt comfort guides may
provide added safety belt comfort for
older children who have outgrown
booster seats and for some adults.
When installed on a shoulder belt, the
comfort guide positions the belt away
from the neck and head.
Comfort guides may be available
through your dealer for the rear
outboard seating positions.
If available, instructions are included
with the guide.

Safety Belt Use During

Pregnancy

Safety belts work for everyone,
including pregnant women. Like all
occupants, they are more likely to be
seriously injured if they do not wear
safety belts.
A pregnant woman should wear a
lap-shoulder belt, and the lap portion
should be worn as low as possible,
below the rounding, throughout the
pregnancy.
The best way to protect the fetus is to
protect the mother. When a safety belt
is worn properly, it is more likely that
the fetus will not be hurt in a crash.
For pregnant women, as for anyone,
the key to making safety belts
effective is wearing them properly.

Safety System Check

Check that the safety belt reminder,
safety belts, buckles, latch plates, and
retractors, are all working properly.
Look for any other loose or damaged
safety belt system parts that might
keep a safety belt system from
performing properly. See your dealer
to have it repaired. Torn or frayed
safety belts may not protect you in a
crash. They can rip apart under
impact forces. If a belt is torn or
frayed, have it replaced immediately.
Make sure the safety belt reminder
light is working. See Safety Belt
Reminders 0 118.
Keep safety belts clean and dry. See

Safety Belt Care 0 68.

Safety Belt Care
Keep belts clean and dry.
Warning
Do not bleach or dye safety belt
webbing. It may severely weaken
the webbing. In a crash, they might
not be able to provide adequate
protection. Clean and rinse safety
belt webbing only with mild soap
and lukewarm water. Allow the
webbing to dry.

Advertisement

Table of Contents
loading

Table of Contents