Table of Contents
Advertisement
2.1.1 Ports connection
Video Connection
Async-data
Connection
Fiber Connection
2.1.2 LED Indicators
The rich diagnostic LEDs on the front panel can provide the
operating status of individual port and whole system. There are
3 LEDs for "POWER", "VIDEO and "LINK" on the front panel of
TX/RX
LED
Color
POWER
Green
VIDEO
Green
LNK
Green
12
Connect the video signal to or from the
product through a 75Ω coax cable with
BNC plug.
n Connect the output data port (e.g. TX+
and TX-) of the other controlled device
to the RX+ and RX- of the RX
n Connect the input data port (e.g. RX+
and RX-) of the other controlled device
to the TX+ and TX- of the TX
n GND in both TX and RX should be
connected directly to user's equipment
Connect the fiber-optic cable pigtail (with
FC/PC, SC/PC, WDM/PC or ST/PC optical
connector) to the product's fiber port.
It indicates that the Converter has power
when lit.
It indicates there is video signal when lit.
It indicates there is laser when lit.
Function
Advertisement
Table of Contents
