45
3.2.
GAlNING ACCESS TO THE PARTS
3.2.1. Cabi net
The upper and lower plates are fixed to the rear by means of 2 screws each.
3.2.2.
Knobs
- Remove the cap from the knob
- Unscrew the nut and remove the
knob
-
When mounting the knob back, make sure that the white marks appear at the correct side
3.2.3. Textplate
-
Remove upper and bottom plate
- Remove all knobs
- Carefully remove the ornamental strips
- Remove lamps OVER RANGE (821) and POWER (820) from the holder; therefore, slightly shift the
textplate to the front
- Remove the textplate