Table of Contents
Advertisement
Turn on meter power supply of data source. Power supply of 48V or 36V or 24V is
available (VB + positive power supply). After wiring the meter needs to be copied, hold
button long till meter is startup. Within 5 seconds after startup, hold
(UP) and
button (DOWN) simultaneously for about 2 seconds, meter parameter
copy is completed. If the copy operation is correct, the meter subject to be copied will
display as follow.
Please note:
Besides, LCD5 meter can only copy parameter of the same meter model.
User Setting Note
After entering the user setting environment, if there's no button operation on the data
for more than 1 minute, the meter will automatically return to display1, and the new set
parameters won't be saved.
The factory parameter set value and the default value of the meter can be set
according to user requirements, the meter parameter can be restored by using "C10
ELECTRIC BICYCLE METER KT—LCD5 Product User Manual
Special wiring cable
Interface of finishing parameter copy
Both C9 power-on password and C11 meter attributes can't be copied.
- 36 -
button
Hide quick links:
Advertisement
Table of Contents
