C11 Attribute Selection Setting - Suzhou Kunteng Electronics Co KT-LCD5 User Manual

○

C11 Attribute Selection Setting

Enter C11 parameter setting interface after C10 parameter setting is finished, C11
parameter column flashes.
C11 is meter attribute selection setting, the setting range is 0-2, hold
(UP) or button (DOWN) shortly for selection.
C11 parameter definition table：
C11
value
Meter uses LCD3 new version of communication protocol, it is compatible
0
Meter uses LCD1 and LCD2 old version communication protocol, it is not
1
As data source for copying parameters, the meter transfers the new LD3
2
C11 selects 2, hold
environment, and then the meter is served as data source for copying parameter (see
parameter copy), there's source logo on display interface.
ELECTRIC BICYCLE METER KT—LCD5 Product User Manual
C11 parameter setting interface
parameter to other meters.
(SW) long for about 2 seconds to exit the setting
Meter Attribute
LCD1 and LCD2.
compatible LCD3.
- 31 -
button