C10 Automatic Restore Default Setting - Suzhou Kunteng Electronics Co KT-LCD5 User Manual

to confirm after each setting and enter next setting. Password setting range is 000-999, hold
button (UP) or
Please note：If you forget your password, the parameters can only be copied (see
parameter copy) by data source meter prier to be decoded.
After finishing C9 parameter setting, hold
current set values and enter C10 parameter setting interface.
○
C10 Automatically Restore Default Setting
Enter C10 parameter setting interface after C9 parameter setting is finished, C10
parameter column flashes.
C10 is automatic restore default settings, the default is n, and the setting can be n, or y,
hold button (UP) or
C10 parameter definition table：
C10 value
When the meter is needed to restore default setting, C10 selects y, hold
long for about 2 seconds, all parameters restore default settings and exit setting
environment, and then return to the display1.
C10 selects n, hold
C11 parameter setting interface.
ELECTRIC BICYCLE METER KT—LCD5 Product User Manual
button (DOWN) shortly for selection.
C10 parameter setting interface
button (DOWN) shortly for selection.
n
y
button (SW) shortly to save the current set values and enter
button (SW) shortly to save the
Restore default setting
Function off
Function on
- 30 -
button