Advertisement
Quick Links
5111862/06
CERAMIC COAL FUEL EFFECT
INSTALLER AND OWNER GUIDE
THIS GUIDE IS FOR FITTING THE CERAMIC
COAL
FUEL EFFECT TO THE
AIRFLAME
MODEL
ONLY
IMPORTANT
THIS GUIDE MUST BE PLACED INSIDE OR ATTACHED
TO THE INSTALLER AND OWNER GUIDE SUPPLIED
WITH THE GAS FIRE. IT MUST BE LEFT WITH THE
OWNER.
THIS GUIDE MUST BE READ IN CONJUNCTION WITH
THE INSTALLER AND OWNER GUIDE SUPPLIED WITH
THE GAS FIRE.
©
GDC Group Ltd. 2015
Advertisement
Summary of Contents for GDC AIRFLAME
- Page 1 TO THE INSTALLER AND OWNER GUIDE SUPPLIED WITH THE GAS FIRE. IT MUST BE LEFT WITH THE OWNER. THIS GUIDE MUST BE READ IN CONJUNCTION WITH THE INSTALLER AND OWNER GUIDE SUPPLIED WITH THE GAS FIRE. © GDC Group Ltd. 2015...
- Page 2 Applications for the copyright owner's permission to reproduce any part of this publication should be made, giving details of the proposed use, to the following address: The Marketing Communications Manager, GDC Group Ltd., Millbrook House, Grange Drive, Hedge End, Southampton, SO30 2DF. UK.
- Page 3 1. It should fit snugly between the burner and the three raised tabs on the front edge of the tray. Figure 1. Fitting the front base coal © GDC Group Ltd. 2015 Page 3...
- Page 4 In order to achieve the best flame effect, it is important that the coals are evenly spaced, and sit 10 -15mm from each other. Figure 3. © GDC Group Ltd. 2015 Page 4...
-
Page 5: Natural Gas Models
7. Finally, take the three remaining square dress coals and position as shown in figure 6. These coals should also overlap the previous row by 5 - 10mm. Again, ensure even spacing. Figure 6. Final NG coal build illustrated © GDC Group Ltd. 2015 Page 5...