Docking 1 St And 2 Nd Generation Ipod Nanos - Audiovox CE710CR Owner's Manual

Docking digital music system for ipod

Table of Contents

Available languages

DOCKING 1

First, install the iPod

Nano bracket into the CE710CR dock.

1st Generation iPod nano:

Align your 1st generation iPod

nano bracket (Figure 1 ). Make sure the 30-pin connector on the bottom of the

nano is positioned over the connector in the CE710CR dock prior to seating the

nano. Carefully slide the nano down onto the connector in order to insure a

secure connection.

2nd Generation iPod nano:

Align your 2nd generation iPod

bracket (Figure 2 ). Make sure the 30-pin connector on the bottom of the nano

is positioned over the connector in the CE710CR dock prior to seating the

nano. Carefully slide the nano down onto the connector in order to ensure a

secure connection.

Note: Be careful not to damage the connector when docking the nano. Never use force when

docking the nano onto the connector.

AND 2

GENERATION iPod NANOS

Nano to the LEFT side of the opening in the

Nano in the RIGHT of the opening in the nano

Figure 1

Figure 2

Table of Contents