Advertisement
OPERATING INSTRUCTIONS
1) Plug in both sets of wires into the two ports which are
located at the bottom of your e-Pulse
2) Attach two pads by snapping both onto the fasteners
attached to the connecting wires.
3) Remove the protective plastic covers from the pads and
sprinkle a few drops of water before using. This will
prolong the durability and life of your pads.
4) Place pads right on the skin near the desired or affected
area of the body. Please read the precautions and FAQ
sections in order to safely use the device.
5) Turn on the device by sliding the switch located on the
top left to its ON position. Your unit is now activated.
6) Increase the intensity of your device to the desired
setting and sit back, relax, and enjoy the different
pulses and sensations as well as the relief from your
tension or pain.
7) The timer is automatically set on your device for
20 minutes. This may be increased in ten-minute
increments to a maximum of 60 minutes. To do this,
press the (T) button on the front of the device. Your
massage unit will shut off automatically after the
allotted time has passed. You can stop your device at
®
2
Pro device.
Advertisement
