Cubic casja80l Instruction Manual

Jellyfish aquarium

Advertisement

Quick Links

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the casja80l and is the answer not in the manual?

Questions and answers

Summary of Contents for Cubic casja80l

  • Page 2 FOLLOWED PRIOR TO THE INSTALLATION, RUNNING, OR ADDI- TION OF ANY LIVE ANIMALS INTO YOUR AQUARIUM. YOUR CUBIC JELLYFISH AQUARIUM HAS BEEN CAREFULLY DESIGNED TO OFFER MANY YEARS OF RELIABLE SERVICE WHEN SET-UP AND MAINTAINED IN ACCORDANCE WITH THESE INSTRUC- TIONS.
  • Page 3 With regular maintenance the sponges should last for a period of up to 3 months at which point they will need replacing. Replacement sponges are available from your dealer. IMPORTANT: only genuine Cubic Jellyfish Aquarium sponges should be used.
  • Page 4: Before Assembling

    AS SOON AS POSSIBLE BEFORE SETTING UP THE AQUARIUM. YOUR AQUARIUM PACKAGE WILL INCLUDE THE FOLLOWING 2 x Filter sponge inserts 1 x Cubic Jellyfish aquarium 1 x Removable LED light strip 1 x Top cover panel 1 x Sealed power distribution box...
  • Page 5: Component Installation

    COMPONENT INSTALLATION THE CUBIC JELLYFISH AQUARIUM HAS BEEN THROUGH EXTENSIVE DEVELOPMENT AND TESTING TO ENSURE THAT IT OFFERS THE BEST CONDITIONS AND CATERS FOR THE VERY SPECIFIC NEEDS OF JELLYFISH. IMPORTANT: UNDER NO CIR- CUMSTANCES SHOULD ANY FORM OF MEDIA, SUBSTRATE OR DECORATION BE ADDED TO THE MAIN DISPLAY AREA.
  • Page 6: Circulation Pump

    MEDIA TOWER LID Fig.2 Take the cylindrical media tower (Fig2: B) and remove the lid by pulling it gently upwards (Fig2: A) The lid seals with an O-ring that sits in a grove around the edge of the lid flange. FILTER MEDIA Fill the media tower with a suitable ‘marine’...
  • Page 7 FILTER SPONGE The aquarium comes with 2 x carbon impregnated filter sponges (Fig 4A). Ensure that both sponges are seated correctly into their respective guides on either side of the rear perforated diffuser plate (Fig 4B). The sponges will help trap any waste or uneaten food, and will help disperse the suction of water through the rear diffuser plate over a wide area to ensure no livestock becomes trapped against the diffuser plate.
  • Page 8: Connecting The Power Supply

    FILLING THE AQUARIUM IMPORTANT: We highly recommend the use of pure Reverse Osmosis or De Ionised water mixed with a good quality aquarium salt when keeping jellyfish. Pure Reverse Osmosis or De Ionised water should also be used when replacing water that has evaporated from the tank.
  • Page 9: Using Remote Control

    USING REMOTE CONTROL The aquarium comes with its own remote control system for adjust- ment of the LED lights. The remote can change various settings which include: Light intensity / Fixed or Auto Colour Change / Auto Colour Change Speed. The remote control will function up to a range of approximately 40ft Power ON Power OFF...
  • Page 10: Adjusting The Flow

    MATURING THE AQUARIUM AND ADJUSTING FLOW RATES Maturing the aquarium filter If using fresh mixed salt water and/or artificial media that require maturation, then the aquarium should be left to run for two weeks prior to the addition of any livestock. IMPORTANT: Jellyfish are highly sensitive to freshly mixed salt water.
  • Page 11: External Surfaces

    With regular maintenance the sponges should last for a period of up to 3 months at which point they will need replacing. Replacement sponges are available from your dealer. IMPORTANT: only genuine Cubic Jellyfish Aquarium sponges should be used. page...
  • Page 12 Additional filtration If stocked and fed sensibly, the built in filtration system will be perfectly adequate in most cases. Although typical Jellyfish species such as the moon jellyfish are remarkably adaptable to varying water conditions, there may be the need to use additional filtration Medias in cases of heavy stocking or heavy feeding. If the addition of extra filtration media is required to maintain better water conditions between water changes, this may be achieved by connecting a suitable remote power filter via the rear external water inlet/outlets (Fig6).
  • Page 13 For additional support and advice visit the Cubic Forum and join the Jellyfish community http://www.cubicaquarium.com/forum.php For Technical support email info@cubicaquarium.com FOLLOW US: www.facebook.com/cubic.aquarium.systems www.youtube.com/CubicAquarium www.twitter.com/cubic_aquarium For all warranty claims and spare parts please contact your local Cubic dealer.
  • Page 14 No claim nor warranty may be accepted nor entered into in relation to any injury or damage incurred during the handling or use of this product unless occurring under the terms of use according to its design and manufacture. Failure to observe all relevant safety and application guidelines will invalidate any such claim. Copyright Cubic Aquarium Systems LTD. and Reef-Eden-International 2012. All rights reserved.

Table of Contents