Installing The Battery - Pyle PICL36B User Manual

Installing the battery

a. Main unit :
-- Remove a screw of battery door on the rear of the main unit.
-- Insert a 3V lithium battery (CR2025), following the polarity(+)
as shown on the diagram of the battery cover.
-- Replace the battery door with fit a screw.
b. Remote control :
-- Remove the battery compartment cover on the
bottom of the remote control, by pushing the tab
to the right while removing the cover.
-- Insert a 3V lithium battery(CR2025 or equivalent)
following the polarity(+) as shown on the diagram on the rear of remote control.
-- Replace the battery compartment cover.
7
CR2025
OPEN
PUSH