Summary of Contents for StageRight miniray 12
- Page 1 MiniRay 652 300W ™ Active Line Array Speakers (604926) MiniRay 12 700W ™ Active Line Array Subwoofer (604912) MiniRay ™ Line Array Suspension Bracket (604900) User’s Manual and Suspension Guide...
-
Page 3: Table Of Contents
CUSTOMER SERVICE ...............................................6 PACKAGE CONTENTS ............................................. 7 604926 MiniRay 652 300W Active Line Array Speaker ............................7 604912 MiniRay 12 700W Active Line Array Subwoofer ........................... 7 604900 MiniRay A1 Line Array Suspension Bracket.............................. 7 PRODUCT OVERVIEW ............................................8 MR652 MiniRay™ 652 300W Active Line Array Speaker (604926) ......................8 MR12 MiniRay™... -
Page 4: Safety Warnings And Guidelines
SAFETY WARNINGS AND GUIDELINES Please read this entire manual before using this device, paying extra attention to these safety warnings and guidelines. Please keep this manual in a safe place for future reference. This line array system is intended for indoor use only. ... - Page 5 All information presented herein is based upon common materials and practices. The installer must comply with all local/state regulations regarding the suspension of active sound systems. Users should consult with engineering and regulatory authorities for specific guidelines. Before suspending any speaker system always inspect all components (enclosure, rigging frames, pins, etc.) for cracks, deformations, corrosion, missing, or loose or damaged parts that could reduce the strength and safety of the system.
- Page 6 The MiniRay A1 Line Array Suspension Bracket is only rated for suspending 2x MiniRay 12 Line Array Subwoofers above 8x MiniRay 652 Line Array Speakers or 12x MiniRay 652 Line Array Speakers. Hearing damage can occur when subjected to prolonged exposure to excessive sound pressure levels (SPL).
-
Page 7: Introduction
INTRODUCTION Thank you for purchasing this MiniRay™ Line Array Audio System! This system includes a 700-watt subwoofer and a 300-watt full range speaker. It is suitable for installation in facilities that seat up to 1000 people. You can ground stack the system or fly it using the dedicated suspension bracket. -
Page 8: Package Contents
1x Audio Jumper XLR-F to XLR-M 1x User's Manual 604912 MiniRay 12 700W Active Line Array Subwoofer 1x MiniRay 12 Active Line Array Subwoofer (hereafter referred to as MR12) 1x AC Power Cord NEMA 5-15P to NAC3FCA 1x AC Jumper NAC3FCA to NAC3FCB... -
Page 9: Product Overview
PRODUCT OVERVIEW MR652 MiniRay™ 652 300W Active Line Array Speaker (604926) 1. Input: Combination XLR / 1/4" TRS balanced line input. 2. Output: XLR balanced through output. 3. Volume: Adjusts the output volume. 4. High-Pass Filter: Enables the 150Hz high-pass filter, which removes low frequencies from the MR652. -
Page 10: Mr12 Miniray™ 12 700W Active Line Array Subwoofer (604912)
MR12 MiniRay™ 12 700W Active Line Array Subwoofer (604912) 1. Input: Combination XLR / 1/4" TRS balanced line input. 2. Output: XLR balanced through output. 3. Volume: Adjusts the output volume. 4. Frequency: Variable low-pass filter sets the level at which frequencies higher than the level are removed from the MR12. -
Page 11: Attaching Cabinets
ATTACHING CABINETS The MR12 and MR652 cabinets must be suspended using the MRA1 Line Array Suspension Bracket (604900) by a qualified Structural Engineer using industry practices. Improper installation will result in damage, injury, or death. Monoprice is not responsible for the application of its products for any purpose or the misuse of this information for any purpose. -
Page 12: Rigging And Suspension
RIGGING AND SUSPENSION Before attempting to suspend the MiniRay™ System, please read and understand this safety information. Never attempt to outwit your own common sense. If you do not understand how to rig or suspend heavy equipment, DON'T DO IT! Always consult with a licensed structural engineer regarding placement and load points of the facility to which this system will be attached. -
Page 13: Rigging/Suspension Hardware
Rigging/Suspension Hardware Any hardware used in an overhead suspension application must be load rated for the intended use. Local hardware stores do not usually stock these products. Purchase additional suspension hardware from rigging supply houses, industrial supply catalogs, or specialized rigging distributors. Hanging Points A licensed Structural Engineer must approve the placement and method of attachment to structures prior to installation of any overhead object. -
Page 14: Connecting The System
CONNECTING THE SYSTEM Your MiniRay™ Active Line Array system is designed to run as a simple full-range audio solution with no need for any outboard processing. Simply connect XLR cables from the output of your mixing console to the input of the MiniRay speakers, then daisy-chain to the next ones. - Page 15 up to 1x MR12 subwoofer and 4x MR652 speakers or 6x MR652 speakers in a single power chain. 6. Repeat steps 4 and 5 until each MR652 speaker and MR12 subwoofer has a power connection. 7. Ensure that the AC Power (7) switch on each MR652 speaker and MR12 subwoofer is in the OFF position and that the Volume (3) knob is fully counterclockwise (minimum).
-
Page 16: Connecting Using An Outboard Active Crossover
Connecting using an Outboard Active Crossover Perform the following steps to connect the system using an outboard active crossover: 1. Ensure that all equipment to be connected is powered off and unplugged before making any connections. 2. Following the instructions that came with your crossover, connect the output of your mixer to the input on your crossover. -
Page 17: Troubleshooting
11. Disable the High-Pass Filter (4) switch on each MR652 speaker, then set the Variable Low-Pass Filter (4) knob on each MR12 subwoofer to the full clockwise position. 12. For each speaker or subwoofer with an AC Power Cord connection, plug the NEMA 5-15 connector into an AC power outlet. -
Page 18: Technical Support
Q3: The sound is severely distorted and the Limit LED is illuminated or blinks rapidly. A3: Try reducing the output volume level. Try reducing the level of the audio source. Try using a different audio source to see if the distortion is in the source or not. You can also reduce the bass on the mixer or EQ to get more volume without distorting the system. -
Page 19: General Specifications
GENERAL SPECIFICATIONS Model 604926 604912 Two-way active line array Active line array Speaker Type loudspeaker subwoofer Rated Power Output (Program) 300 watts 700 watts Frequency Response (-10dB) 85 Hz ~ 20 kHz 45 Hz ~ 800 Hz 40 Hz ~ 200 Hz variable Filter 150 Hz low-cut high-cut... -
Page 20: Electrical Specifications
ELECTRICAL SPECIFICATIONS Model MR12 Subwoofer MR652 Speaker Input Voltage 120 VAC, 60Hz 120 VAC, 60Hz Quiescent Power Draw Power Consumption at 1/3 Power, Pink Noise 350W, 3A RMS 120W, 1.2A RMS Power Consumption at 1/8 Power, Pink Noise 115W, 1A RMS 40W, 0.3A RMS Maximum Power Consumption 500W... -
Page 21: Notice For Industry Canada
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. - Page 24 www.monoprice.com...
Need help?
Do you have a question about the miniray 12 and is the answer not in the manual?
Questions and answers