Advertisement
SOFTWARE INSTALLATION
Load the software into your PC
Important: Before installing the software, make sure
that:
!Disable or un-install any previously installed PDA
keyboard software.
!You save all open documents.
!ActiveSync is installed and active on my PC.
!Your handheld has at least 150KB free memory.
1. Insert Pocket PC into synchronizing cradle. Make
sure your Pocket PC is ON and connected to your
computer through ActiveSync.
2. Insert the keyboard software floppy disk into your
floppy drive (usually A:).
3. On your PC computer, go to Start, then Run to find
the program called "Setup" to complete the installation.
Note: If you open the floppy drive, you will see 8 files
on the disk. The file to install the program is
Setup.exe.
4. To verify that installation of the keyboard software
is complete and on your Pocket PC, click on the Start
menu on your Pocket PC. You will see the keyboard
icon,
, in the Start menu.
2
Advertisement
