Additional Features; Warranty And Support - QSee Plus Series Quick Start Manual

ADDITIONAL FEATURES

SD MEMORY CARD
The SD memory card slot is located under the
bottom panel of the camera. Push the card in
firmly to load the card. To eject, press the card
firmly again. Some units will include an SD card.
NOTE: SD memory card slot and reset button can both be accessed by removing the bottom panel
from the camera with a standard screwdriver. Reattach panel before mounting cameras.
14
CAMERA RESET BUTTON
If you wish to change the existing Wi-Fi network
to a different network, while the camera is
powered on, hold the reset button for five
seconds and setup your camera again.
NETWORK CABLE
Please do not worry about the additional
network cable on your bullet camera. This
network cable can alternatively be used to hard-
wire the camera using a cat5 cable instead of
a Wi-Fi connection. Please make sure that this
cable is never exposed to moisture.
WARRANTY & SUPPORT
Q-See is always here to answer your questions and take your valued suggestions.
Our focus is providing excellent customer support and always working to improve our
customers' experience.
Please do not hesitate to call us at 1-877-998-3440 Monday-Friday 6:00 AM - 7:00 PM PST.
Visit us at www.q-see.com/support for 24/7 support and access to our Support Portal.
15