Gefen Pro GEF-HDFST-444-4ELR User Manual page 81

RS-232 / IP CONTROL
#show_hdcp Command
The #show_hdcp command displays the HDCP status on the specified input
Syntax:
#show_hdcp param1
Parameters:
param1 Input [1 ... 4]
Notes:
Set param1 = 0 to displays the HDCP status of all inputs.
Examples:
#show_hdcp 3
INPUT 3 HDCP IS ENABLED
#show_hdcp 0
INPUT 1, 3, 4 HDCP ARE ENABLED
75