Advertisement
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2015 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
REV 16b
Advertisement
Table of Contents
Related Manuals for Central Machinery 63042
Summary of Contents for Central Machinery 63042
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
-
Page 2: Table Of Contents
7. Use only as described in this manual. Use only 13. Turn off all controls before unplugging. manufacturer’s recommended attachments. 14. Use extra care when cleaning on stairs. 15. Connect to a properly grounded outlet only. See Grounding Instructions. Page 2 For technical questions, please call 1-888-866-5797. Item 63042... - Page 3 No adaptor should be used with this appliance. Grounding 125VAc 3-prong plug and Outlet (for up to 125VAc and up to 15A) Item 63042 For technical questions, please call 1-888-866-5797. Page 3...
-
Page 4: Specifications
Specifications Electrical Rating 120VAC / 60Hz / 12.5A Maximum Temperature 221º F 3140075 Page 4 For technical questions, please call 1-888-866-5797. Item 63042... -
Page 5: Setup
Switch (on back) Steam Light Trigger Lock Trigger Nozzle Hose Floor Brush Extension Tubes Floor cloth Squeegee Window Attachment Adapter Upholstery Brush Scrubber Small Large Brass Brushes Brushes Brush Item 63042 For technical questions, please call 1-888-866-5797. Page 5... -
Page 6: Operation
Cap down while turning clockwise until tightened securely. 4. Empty remaining water from Tank. 5. Fill the Measuring Cup with distilled water no higher than the 27 oz (800 ml) mark. Page 6 For technical questions, please call 1-888-866-5797. Item 63042... -
Page 7: Steam Cleaning
User-Maintenance without an attachment. and Storage on page 11. 4. Plug Steam Cleaner into dedicated 120V outlet and press Power Switch on back of unit to ON position (I). Item 63042 For technical questions, please call 1-888-866-5797. Page 7... - Page 8 To prevent burn injury, wait until cloth Extension has cooled before removing from Floor Brush. Tube Note: Floor Brush may be stored on holder located on back of Unit. Page 8 For technical questions, please call 1-888-866-5797. Item 63042...
- Page 9 Brass Brush. 2. Slide Brass Brush onto Adapter as far as possible. Adapter NOTIcE: Brass Brush may scratch some surfaces, such as stainless steel appliances. Brass Brush Item 63042 For technical questions, please call 1-888-866-5797. Page 9...
- Page 10 Small Nylon Brush: Cleans grout. c. Scrubber: Removes tough dirt and scuffs. NOTIcE: Scrubber may scratch some surfaces, such as stainless steel appliances. d. Jet: Concentrates steam into tight spaces. Nylon Scrubber Brushes Page 10 For technical questions, please call 1-888-866-5797. Item 63042...
- Page 11 Empty tank, rinse with water, and allow WARNING! If the supply cord of this tank to dry before replacing cap. appliance is damaged, it must be replaced only by a qualified service technician. Item 63042 For technical questions, please call 1-888-866-5797. Page 11...
-
Page 12: Maintenance
Only use included measuring cup to fill tank. 2. Unit not heated fully. 2. Wait until Steam Light goes out. Follow all safety precautions whenever diagnosing or servicing the appliance. Disconnect power supply before service. Page 12 For technical questions, please call 1-888-866-5797. Item 63042... - Page 13 LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. Item 63042 For technical questions, please call 1-888-866-5797. Page 13...
-
Page 14: Parts List And Diagram
Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Page 14 For technical questions, please call 1-888-866-5797. Item 63042... - Page 15 Assembly Diagram 31 32 33 Item 63042 For technical questions, please call 1-888-866-5797. Page 15...
-
Page 16: Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
Need help?
Do you have a question about the 63042 and is the answer not in the manual?
Questions and answers
Part where can I buy the tank cap for steam cleaner 1500w 63042?
The tank cap for the Central Machinery 1500W Steam Cleaner model 63042 is listed as part number 1 in the parts list. You can refer to the parts list and assembly diagram in the manual to identify it. All repairs and part replacements should be done by certified and licensed technicians.
This answer is automatically generated