Calibration - ALDI V4916DSO364 User Manual

Calibration

If you have not used the thermometer for a pro-
longed period of time or after approx. 10 mea-
surements, the warning notice will appear by the
21
segment indicator for CL on the top left of the
1 2
LCD display and the green backlight of the
thermometer will blink twice and emit a signal tone
twice to remind the user that the probe tip with the
infrared sensor should be cleaned.
Calibration
The thermometer was calibrated in the factory fol-
lowing manufacture. If the thermometer is used in
accordance with the provisions and notices in the
user manual for private and non-commercial use,
there is no need to calibrate it at regular intervals.
If, however, you doubt the accuracy of the mea-
surements, you should immediately contact your
vendor.
Never attempt to disassemble the thermometer or
make changes as they could result in risks and in
such a case, also void any warranty claim!
35