Guides Over View Precaution miniOne Specifications Diagram of the miniOne miniOne accessories Unpacking the miniOne How miniOne works Connect the power and unfold Assemble the filament holder Installing and loading the filament AladdinWare Installation Connecting miniOne with Aladdinware...
Do not touch it while it is hot. Children must be monitored when near the miniOne when it is on. During printing, do not touch the moving pieces which include the nozzle, build bed, Z axis, etc., as they are moving at high speeds.
iagram Over View Filament spool Filament Guide tube Filament holder Printing indicator light Power connector Build bed Power switch Power indicator light Reset Button(When WiFi connec- tion was unsuccessful, press reset button 10 seconds to restart ) Y axis move range Z axis move range X axis move range Ethernet cable socket...
ccessories Over View Gift Box Build bed Filament Spool Spare nozzle and holder Power adapter Filament guide Taps Screw and nut Remote control Hexagon key Tweezers Shovel and light base (If any thing is missing, please contact your local distributor or send email to Wrench Ethernet Cable support@longer3dp.com...
Hold here to take away the outer box Tips: Please keep the original package until you confirmed that you won’t need return or replace the printer.. The First Layer is glass build bed. he Second Layer is miniOne 3D Printer. The Third Layer are accessories.
How the miniOne works Connect the power cable and press the power switch to turn on the mini- One. The power indicator light will turn on. The miniOne will unfold auto- matically by itself in 10 seconds. Press Power switch Alternatively, unfold by connecting the miniOne with AladdinWare.
How the miniOne works The filament spool made by two plastic parts and a beam The filament spool fixed by screws and nuts, they are 4 places need to be fixed. They are two kinds of beam to hold different filament spools, the longer one is for 1kg spool, and the shorter one is for 0.75kg spool.
How the miniOne works Unfold the minione as introduced in aladdinware introduction Cut the filament profile in flat way , push the filament go though the filament guide Insert the filament into the exturder as the drawing showed...
Installation How the miniOne works Please go to “support” section of www.longer3dp.com download the latest version of AladdinWare Extract the WinRAR file and double click English Version ”setup” Select installation path, default is Disk C and follow the pup up window...
Page 12
Connect/Disconnect: Connect / Disconnect the AladdinWare with mini- One 3D printer Configuration: Control printer X/Y/Z axis or motors movement WiFi Setting: Connect Aladdinware with miniOne via WiFi Print: Select printing parameter and start to print a model Stop: Stop printing...
Page 13
How the miniOne works Load When loaded properly, the model appears as purple. File format should be STL Select installation path, default is Disk C and follow the pup up window instruction to finish. When loaded in a wrong position or out of the printing area, the model appears as green and cannot be printed..
Page 14
How the miniOne works View View the model from different way so we can tell whether if the model need to add support or not They are 4 quick views and if you want see other views, Keep pressing the right mouse button and move the mouse to view your model.
Page 15
How the miniOne works In each direction, one-click will rotate the model by 15°. Rotate One-click will scale up/down the model by 10%. Click Reset to restore. Scale WiFi Select “Network mode” Input your WiFi “network name” and “password”...
Page 16
How the miniOne works Config To unfold miniOne, click “Unfold”. The cantilever arm of miniOne will stand up slowly till a position ready for printing, as shown in the figure below. Click”Lock”,the axis all locked and can’t move by hand, Click”Un- lock”, the 3 axis could be move by hand, sometimes this operation may...
Page 17
How the miniOne works Layer Height:The layer height can be either 0.1mm or 0.2mm. Nozzle temperature:For printing with PLA filament, the nozzle tem- perature should be set as 200C°. Printing Speed: According to your need, the speed can be set as slow, middle or fast mode.
(as shown). Click “Connect,” once the connection is successful you will see the image of connected links. This allows you to use the miniOne printer without internet. If you want to use internet to use the miniOne 3D printer, please see next page Click”WiFi Setting”...
Page 19
Click “Scan printer“ in aladdinware, choose followed pop up mac address, then click”connect” ,now the connection is succeed , this way can let you use 3D printer without internet , if you want to use network during use miniOne 3D printer, go on follow step 4. Click”WiFi Setting” followed 1: Click ”connect”, if not succeed,...
How the miniOne works Open the Configure window and click “Preheat,” wait for the temperature to reach around 200°C. Click “Feed” to allow the filament to discharge from the nozzle. Let it extrude for a few minutes until the material comes out steadily and consis- tently.
If the first layer printed like the below image, congratu- lations the printer was well calibrated and you can begin 3D printing with your miniOne. If the first layer printed like below, the distance from the nozzle to bed was too far.
How the miniOne works Z axis end-stop screw Build bed leveling The Z-axis end-stop screw can be adjusted by hand Distance A is the distance between Z axis end-stop screw and Z axis end-stop; Distance B is the the distance between the nozzle and the build bed.
How the miniOne works Now the build bed is well leveled, we can have a printing test again or we can start to printing a exciting things first. Load the light’s STL model to AladdinWare, choose the 0.1mm layer height and no support.
Does the miniOne require maintenance? The miniOne should require cetain day-to-day maintenance. When you first receive the minione some calibration is needed due to trans- portation. The build bed should be leveled by a few adjustments and a few test prints (as mentioned in sections 2.7 and 2.8) Every few months the rods should be greased with the multipurpose lithium grease.
Page 25
1.A photo of the miniOne in question 2.Your original Order ID 3.The address that the miniOne will be arriving from (as it appears on the sipping label) 4.The serial number from the miniOne...
Page 26
Support and FAQ We greatly appreciate that you chose to use our miniOne 3D printer. If you have further question, please feel free to reach us below: Tel: 86-755-28370976 Email: support@longer3d.com Website:www.longer3dp.com Shenzhen Longer 3D Technology Co., Ltd. Easy print for every print...