Pairing The Keyboard; Charging The Keyboard - Azio MK mac User Manual

Bluetooth mechanical keyboard

Hide thumbs Also See for MK mac:

Table of Contents

SETUP

Setting Up

Before you can use the keyboard, you have to pair it with your Mac. Pairing allows your key-

board to communicate wirelessly with your Mac. You only have to pair once.

Pairing the Keyboard

1. Turn on the keyboard. The power switch is located on the bottom side of the keyboard.

2. Put the keyboard in Pairing Mode by holding down the 'Connect' button located on the

bottom side of the keyboard. Once the LED starts flashing, release the button.

3. On your Mac, navigate to 'System Preferences' and select 'Keyboard'. Next, click on 'Set Up

Bluetooth Keyboard'.

4. Once the setup wizard finds 'Azio MK Mac Keyboard', click on 'Continue'.

5. Your screen will now display a 8-digit code. Enter the 8-digit passcode on the keyboard,

and press Return.

6. The keyboard is now ready for use.

Once the battery is low on power, the second status indicator LED will begin to flash. To

charge the keyboard, simply connect the included USB Type-C cable to an available USB port

and connect the Type-C connector to the charging port of the keyboard. The third status indi-

cator LED will light up when the keyboard is charging. Once it's full, the LED light will turn off.

Table of Contents

Show Quick Links

Table of Contents

Do you have a question about the MK mac and is the answer not in the manual?