Download Print this page

ezDISK EZ0330 User Manual

Hard drive docking station

Advertisement

Quick Links

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
EZ0330 User Manual

Advertisement

loading
Need help?

Need help?

Do you have a question about the EZ0330 and is the answer not in the manual?

Questions and answers

Summary of Contents for ezDISK EZ0330

  • Page 1                                         EZ0330 User Manual...
  • Page 2   Thank you for choosing ezDISK EZ0330 Hard Drive Docking Station of  the Perfection Product Series. Please make sure the kit includes all of  the following contents.   ● ezDISK EZ0330 Hard Drive Docking Station x 1  ● Power adapter 12V/1.5A x 1  ● USB3.0 cable x 1  ● Product user manual x 1  ● Warranty card x 1                                  1 / 6   ...
  • Page 3   IMPORTANT WARNING: About 512 Byte/Sector and 4K Sector Switch    512 Byte and 4K refer to the amount of data storable on a minimal unit  of a hard disk drive (per sector). If you wish to remove the internal drive  (containing data) from your computer to be used as an external one  via  EZ0330,  the  512  Byte/sector  format  of  traditional  computers  is  recommended.  Switching  to  4K  sector  will  require  the  disk  to  be  formatted and erase all data contained. However, if you are using a 4k  sector or brand new hard drive, we recommend you keep the original  4k sector format.                     ...
  • Page 4   How to identify your current sector format?  Select Start located on bottom left corner, followed by Accessories ‐>  System Tools ‐> System Information.                        3 / 6   ...
  • Page 5   Select Components ‐> Storage ‐> Disks. The Bytes/sector should be  shown as in the snapshot below.                        4 / 6   ...
  • Page 6   Product Description        (a) Power button  (b) Power indicator/Access indicator  (c) Hard drive slot    (d) Hard drive eject button  (e) Power jack  (f) USB3.0 connector  (g) 512 Byte and 4K format switch      5 / 6   ...
  • Page 7   Installing the Hard Drive  1. Plug the power adapter into EZ0330 power jack(e)  2. Insert the 2.5 inch or 3.5 inch hard drive into hard drive slot(c)  3. Connect each end of the USB cable to the USB connector(f) and  computer USB host  4. Press the power button(a), and the power indicator(b) will light up  to show that hard drive is in operation  5. Right‐click on the Computer icon on the desktop, then select  Manage ‐> Device Manager ‐> Disk drives. If “ezDISK EZ0330 USB  Device” appears, installation is complete.          6 / 6   ...