Rear Window Wiper And Washer; Headlight Washer - Mazda 3 Owner's Manual

Rear Window Wiper and
Washer
*
The ignition must be switched ON to use
the wiper.
Rear Window Wiper
Turn the wiper on by turning the rear
wiper/washer switch.
Switch Position
Type Type
No.
A B
Stop
Intermittent
Normal
Rear Window Washer
To spray washer uid, turn the rear wiper/
washer switch to either of the
After the switch is released, the washer
will stop.
If the washer does not work, inspect the
uid level (page 6-34 ). If the uid
level is normal and the washer still does
not work, consult an expert repairer,
we recommend an Authorised Mazda
Repairer.
Wiper operation
position.
Switches and Controls

Headlight Washer

The engine must be started and the
headlights must be turned on.
If you want to operate headlight washers,
double ick the wiper lever.
NOTE
When the windscreen washer
is operated for the rst time
after turning on the headlights,
the headlight washers operate
automatically.
If air enters the headlight washer
uid pipe under conditions such
as when the vehicle is brand-new
or after an empty washer tank is
replenished with washer uid,
washer uid will not spray even
when the wiper lever is operated. If
this occurs, perform the following
procedure:
1. Start the engine.
2. Turn on the headlights.
3. Double ick the wiper lever
several times until the washer
uid sprays.
When Driving
*
OFF
Washer
4–79
*Some models.