Tools; Mounting - ABB COM600 Product Manual

ABB
Station Automation
COM600
Product version: 3.4

14. Tools

Engineering of COM600 is done offline on a
separate computer using the Microsoft
based SAB600 engineering tool supplied with
COM600. The configurability and functionali-
ty of COM600 depends on the communication
protocol used for communication between
COM600 and the IEDs. The connectivity pack-
ages for ABB's protection and control IEDs
enable an efficient configuration of COM600.
The connectivity packages include descrip-
tions of the data and signals available in the
Table 21. Tools
Description
Station Automation Builder 600

15. Mounting

The COM600 computer is designed for
mounting into a control panel by using the
Fig. 10 Top view
IEDs. The descriptions are used to automati-
cally configure the master communication of
COM600.
At project engineering SAB600 uses the
® .NET- potential of the IEC 61850 standard by sup-
porting the IEC 61850 based SCL (Substation
Configuration Description Language) file
import, including the import of the communi-
cation and graphical parts of the SCL-file. The
finalized projects are updated from SAB600
to COM600 at site or remotely provided that a
secure Ethernet connection is available.
included wall-mount kit. The COM600 is
fastened using the four holes on the unit and
four screws.
Fig. 11 Side view
1MRS756764 B
Version
3.4
17