Download Print this page

J&M Corporation HCRK-7252GTM-XXR Installation Instructions

7.25” fairing speaker kit for 1998-2013 harley street/ultra/electraglide

Advertisement

Quick Links

ROKKER® XXR Series
7.25" Fairing Speaker
Kit for 1998-2013 Harley®
Street/Ultra/Electraglide
HCRK-7252GTM-XXR
#
Installation
Instructions

Advertisement

loading

Summary of Contents for J&M Corporation HCRK-7252GTM-XXR

  • Page 1 ROKKER® XXR Series 7.25” Fairing Speaker Kit for 1998-2013 Harley® Street/Ultra/Electraglide HCRK-7252GTM-XXR Installation Instructions...
  • Page 2 Installation and Instructions Labeled Top Remove the windshield and outer fairing shell completely. Fig. A Unplug the spade wire connectors on the back of each of the stock speakers. Remove the three attachment screws from the back of each speaker and remove each speaker assembly from the fairing. Discard the speaker assemblies and the attachment screws.
  • Page 3 Fig. G 11. Repeat steps 5 through 10 for the opposite side speaker assembly. Late Style Fairing Support Brace Using 5 of the short self-tapping screws provided, install a J&M 7.25” speaker onto the adapter with the speaker’s crossover assembly and spade terminals pointing inward. Include a fairing sup- port brace adapter on the lower outer corner of the assembly (Fig.
  • Page 4 WARRANTY AND REPAIR INFORMATION TWO YEAR LIMITED WARRANTY In order to facilitate the servicing of this warranty, the Warranty Registration Form should be filled out and returned within 10 days of the date of purchase. However, return of the Warranty Registration Form is not a precondition of this warranty, and this Warranty will be observed by J&M CORPORATION whether or not the Warranty Registration Form is returned, on the condition that other satisfactory evidence of the date of the original purchase is provided to J&M CORPORATION.

This manual is also suitable for:

Rokker xxr series