Advertisement
KICKER AMP
INSTALLATION GUIDE
FOR USE WITH VICTORY CROSS COUNTRY TRUNK
INCLUDED IN THIS FIT KIT:
> Step-by-step Installation Guide
> 5 1/4" Kicker Speakers Pair
> Kicker Amp 100W/50W
> Stainless Steel Mounting Bracket
> Custom Wiring Harness
> Black Heat Shrink
&
SPEAKER
> Black Cable Tie
> All Necessary Hardware
- 8 - 32 x 1/2" Button Head Bolts
- 8 - 32 Nylock Nuts
Advertisement
Table of Contents
Summary of Contents for KLOCK WERKS VICTORY CROSS COUNTRY KICKER
-
Page 1: Installation Guide
KICKER AMP & SPEAKER INSTALLATION GUIDE FOR USE WITH VICTORY CROSS COUNTRY TRUNK INCLUDED IN THIS FIT KIT: > Step-by-step Installation Guide > Black Cable Tie > 5 1/4” Kicker Speakers Pair > All Necessary Hardware - 8 - 32 x 1/2” Button Head Bolts >... - Page 2 KLOCK WERKS | VICTORY CROSS COUNTRY KICKER INSTALLATION GETTING STARTED | *Please reference model appropriate service manual for procedures and torque specifications. 1. Protect painted surfaces with a soft cloth. 2. Remove upper and lower fasteners for inner chin fairing and disconnect battery (Pic 1 and 2) HARNESS INSTALLATION 3.
-
Page 3: Speaker Installation
KLOCK WERKS | VICTORY CROSS COUNTRY KICKER INSTALLATION SPEAKER INSTALLATION 13. Install the rear speaker housings back onto the trunk ensuring correct wire routing to avoid pinching (Pic 11) 14. Left side speaker (Pic 12) a. Connect the male ends from the new harness to the female ends of the stock harness b. - Page 4 Note: At this time, it is highly recommended to follow the guidelines in your Kicker PX 100.2 owner’s manual to set up the amplifier. Klock Werks recommends that the dip switches be set up as follows: AUTO TURN-ON - 12V INPUT LEVEL - HI HI-PASS –...
Need help?
Do you have a question about the VICTORY CROSS COUNTRY KICKER and is the answer not in the manual?
Questions and answers