Epson XP-243 Series' XP-245 Series User Manual page 60

User's Guide
1. Place the originals.
By placing multiple originals on the scanner glass, you can scan them all at the same time. Make sure there is a
gap of at least 20 mm between the originals.
2. Start Epson Scan 2.
3. Select Photo Mode from the Mode list.
4. Make the following settings on the Main Settings tab.
❏ Image Type: Select the color for saving the scanned image.
❏ Resolution: Select the resolution.
Note:
The Document Source setting is fixed as Scanner Glass, and the Document Type setting is fixed as Reflective.
(Reflective means originals which are not transparent, for example ordinary papers or photos.) You cannot change these
settings.
Scanning
60