Table of Contents
Advertisement
Note:
The illustrations in this manual are for explanation purposes only and may differ from the
actual unit. It is subjected to change without notice for future improvement.
PRODUCT OVERVIEW
Indoor Unit
Movable panel & Front panel
Super alleru-buster
filter
Oxygen indicator
Oxygen Supply
(Service not
needed. Do not
open.)
Air filters
Outdoor Unit
Air inlet (rear)
Air inlet (side)
Remote Control
Transmitter
Temperature
setting
LCD
display
OFF/ON
Cooling, Auto,
Heating, Dry
mode
Ion operation
Hints
If you wish to have the cool air blowing directly on you, set the airflow direction downward but not for an excessive length of time,
●
as it may harm your health.
It is possible to dim the brightness of the indicators by pressing the
●
default brightness.
Troubleshooting
Mist emerges from indoor unit.
●
Remote control/display does not work.
●
The unit cannot operate.
●
Outdoor unit emits water/steam.
●
Airflow Direction
Louver
Receiver
��
�� �� ��
Air outlet
Oxygen
operation
Clock
operation
Powerful operation
Sleep timer
Auto OFF/ON button
Ionizer
Do not
touch during
operation
Indicator
Fan speed/Airflow
direction selection
Timer setting
Quiet
operation
Check
Error reset
button for 5 seconds. Repeat the process to return to
Condensation effect due to cooling process.
➤
Check whether batteries are correctly inserted or need replacement.
➤
Check either circuit breaker is tripped, power plug is inserted correctly or
➤
timer is used correctly.
Ensure "OFF" indicator does not shown on remote control.
➤
Condensation or evaporation happens at piping surface.
➤
■ About
Remote Control Preparation
2. Insert
1. Pull out.
batteries
(LR03).
3. Press CLOCK button.
4. Set
current
time.
5. Press SET button to confirm.
• Timer operation will be based on
current time set.
• The batteries can be used for
approximately 1 year.
• The batteries must be
disposed properly.
Remote Control Signal
• Make sure it is not obstructed.
• Maximum distance is 8m.
• Certain fluorescent lights may
interfere with signal transmission.
Consult your dealer.
Auto OFF/ON Button
• To operate the unit if the remote
control is misplaced or
malfunctioning.
Operation
Action
mode
Automatic
Press once.
Operation
Press until "beep"
*Cooling
sound and release.
Operation
Press until "beep"
sound and release.
*Heating
Press again until
Operation
"beep-beep" sound
and release.
• To OFF, press again the Auto OFF/
ON button.
*The usage of this button is not
recommended.
3
Hide quick links:
Advertisement
Table of Contents
