Monster Greenpower Plus Outlet Management Hook-Up; Greenpower Plus Factory Settings - Monster Power HDP 1250G+ Instructions And Warranty Information

ENGLISH
Hook-Up Guide
Monster GreenPower
GreenPower Plus Controlled (switched) outlets are designed
to automatically shut down when the component plugged into
the GreenPower Plus Control Outlet is turned off.
A Plug your HDTV/TV into the GreenPower Plus Control outlet.
B Plug other components into their corresponding GreenPower
Plus Controlled outlets.
C With your HDTV/TV in stand-by mode, press and hold down
the GreenPower Plus Programming button (labeled "Switched")
on the front panel for ten (10) seconds. The PowerCenter
will beep three (3) times to indicate it has learned the TV's
stand-by power draw.
GreenPower Plus
16
Control Outlet
LIT_MANUL_HDP_1250G+_NA_G1jl.indd 16
Plus Outlet Management Hook-Up
™
GreenPower Plus
Controlled Outlets
When the HDTV/TV plugged into the GreenPower Plus Control
Outlet is turned off or goes into stand-by mode, the GreenPower
Plus Controlled Outlets automatically shut down, eliminating
wasted stand-by mode power consumption.
When you turn your TV back on, the GreenPower Plus outlets
automatically power up again.

GreenPower Plus Factory Settings

Follow this procedure to return the PowerCenter to the original
factory settings for activating GreenPower Plus:
Press and hold Greenpower Plus Programming button for
fifteen (15) seconds or until PowerCenter beeps five (5) times
(Ignore the triple beep after five seconds).
Factory settings feature a Trigger ON at 15W
and a Trigger OFF at 10W.
GreenPower Plus
Programming Button
1/18/12 4:22 PM