Alarm Clock - August MB300 User Manual

6. Alarm Clock

Set Time and Date
Press and hold SET until the minutes begin to flash. Use
VL+ and VL- to set the minutes then use SET to move
through the settings for hour, 12/24h mode, year, month and
date.
Pressing and holding VL+ or VL- will increase the speed of
adjusting.
Press MODE to return to clock mode.
Set Alarm Clock
Press MODE whilst in clock mode to enter alarm settings
mode. The screen will show your current alarm time setting,
press and hold SET until the minutes begin to flash to change
the alarm settings. Pressing MODE will return to the alarm
settings mode.
Use VL+ and VL- to set the minutes then use SET to move
through the settings for hour and alarm tone. Once you have
setup all your settings, press SET to confirm.
If BIBI is selected a beep will be used as your alarm tone.
If MP3 is selected your pre-selected music file will be used
as your alarm tone. (Chapter 8. Music Player for more
details).
If RADIO is selected your pre-selected radio station will
be used as your alarm tone. (see Chapter 7. FM Radio for
more details).
-6-
If BIBI or MP3 is selected as the wake-up mode, the alarm
will automatically stop after 3 minutes. You can press
SNOOZE or LT to reschedule the alarm for an additional
5 minute sleep or press any other key to stop the alarm.
If FM is selected as the wake-up mode, when the alarm is
triggered, the snooze function is disabled.The device will
enter SLEEP mode and start playing your pre-selected radio
station for 30 minutes before turning off. The remaining time
left in SLEEP mode will be displayed on the LCD screen.
The alarm can be disabled and enabled by pressing ALARM
whilst in clock mode. When the alarm is enabled, the alarm
bell icon will show on the LCD screen.Or press MENU
button to stop the alarm.
Sleep Timer
The sleep timer can be set to automatically turn off the radio
or music player after a set time period. The duration can be
set between 10 minutes and 3 hours in 10 minute increments.
The default setting is 30 minutes.
Press ALARM in radio or music player mode and use VL+/
VL- to increase and decrease the time. Press ALARM to
confirm.
Temperature Display
Whilst in clock mode, use VL- to switch between
temperatures displayed in °C and °F.
7. FM Radio
Press RADIO to enter FM mode
tune the radio, pressing and holding them will increase the
speed of tuning.
and can be used to
-7-