Dismantling Of The Front Panel Assembly; Dismantling Of The Rear Panel Assembly - Philips MCM760 Service Manual

DISMANTLING INSTRUCTIONS

Dismantling of the Front Panel assembly

1) The Knob Volume (pos 10) can be remove by pulling it
out in the direction as shown in Figure 7
2) The Knob Bass/Knob Treble (pos 11) can be remove by
pulling it out in the direction as shown in Figure 8.
3) Loosen 4 screws D (see Figure 10) to remove the Shield
Tape Deck and Module Tape Deck (pos 29).
4) Loosen 2 screws E (see Figure 9) to remove the Bracket
Top Support .
Figure 7
Figure 8
2-2
5) Loosen 4 screws G (see Figure 9) to remove the Bracket
Main.
6) Loosen 6 screws C4 (see Figure 11) to remove the
Display Board.
7) Loosen 4 screws H (see Figure 11) to remove the Top
Key Board.
Figure 9
Figure 10
Dismantling of the Front Panel assembly
Figure 11

Dismantling of the Rear Panel assembly

1) Loosen 3 screws K and 2 catches C5 (see Figure 12) to
remove the Tuner Board assembly.
2) Loosen 3 screws L (see Figure 12) to free the Main
Board.
3) Loosen 1 screw M (see Figure 12) to free the Mains
Socket Board.
2-2
4) Loosen 1 screw N and 2 catches C6 (see Figure 12) to
free the Panel Rear (pos 53) by sliding it out towards the
rear.
Note : Tuner Board assembly and Mains Socket Board
can also be remove together with the Panel Rear.
Figure 12